Page 50 - Dabmar 2019 Catalog

Landscape
PAGODA LIGHTING
Pre-wired with UL Listed Direct Burial Wire/Cable
1/2” Threaded Base Opening
Connector Available: P-CN-01 (sold separately) Available Finish: Green
REMOTE 12 VOLT TRANSFORMER REQUIRED FOR INSTALLATION (SOLD SEPARATELY)
1.00”
0.85”
LV103 - LV104
THREE-TIER PAGODA LIGHT
PATH, WALKWAY AND AREA LIGHTING
Material: Powder Coated Cast Aluminum
Lens: Frosted, Heat Resistant, Tempered Glass
Lamp: JC Bi-Pin Base (50W Maximum) Available in 30K or 64K (LED)
10.00”
254.00mm (DIAMETER)
MODEL NUMBER
LV103
LV-LED103
LV104
LV-LED104
LAMP ILLUMINANT WATTS TYPE TYPE (W)
JC HALOGEN 20
JC-LED LED 4.0
JC HALOGEN 20
JC-LED LED 4.0
VOLTS LAMP(S) (V) INCLUDED?
12 YES
12 YES
12 YES
12 YES
3.00”
76.20mm
4.50”
114.30mm
6.00”
152.40mm
13.50”
(NOT INCLUDING THREADS) 342.90mm
Pre-wired with UL Listed Direct Burial Wire/Cable
6” Riser Included - 1/2” NPT (LV103)
3” Base - No Riser Included (LV104)
Ground Spike Included for Installation (LV103) Connector Available: P-CN-01 (sold separately) Available Finish: Black, Green, Verde Green
ETL Approved
LV-LED5000
THREE-TIER PAGODA LIGHT
PATH, WALKWAY AND AREA LIGHTING
0.78”
(DIAMETER) 19.81mm
Material: Plastic
Lens: Frosted, Acrylic Lens
Lamp: JC Bi-Pin Base (2.5W Maximum) Available in 30K or 64K (LED)
4.50”
114.30mm
7.38”
(Total Height) 187.45mm
2.88”
73.15mm
MODEL NUMBER
LV-LED5000
LAMP ILLUMINANT WATTS TYPE TYPE (W)
JC-LED LED 4.0
VOLTS (V)
12
LAMP(S) INCLUDED?
YES
Pre-wired with UL Listed Direct Burial Wire/Cable
1/2” Threaded Base Opening
Connector Available: P-CN-01 (sold separately) Available Finish: Black
LV-LED5100
FOUR-TIER PAGODA LIGHT
PATH, WALKWAY AND AREA LIGHTING
1.02”
0.85”
Material: Plastic
Lens: Frosted, Acrylic Lens
Lamp: JC Bi-Pin Base (2.5W Maximum) Available in 30K or 64K (LED)
6.13”
155.70mm
9.06”
(Total Height) 230.12mm
2.93”
74.42mm
MODEL NUMBER
LV-LED5100
LAMP ILLUMINANT WATTS VOLTS TYPE TYPE (W) (V)
JC-LED LED 4.0 12
LAMP(S) INCLUDED?
YES
50 DABMAR LIGHTING, INCORPORATED
www.dabmar.com
1/2” NPT
6.25”
(DIAMETER) 158.75mm
1/2”
(THREADED OPENING)
6.25”
(DIAMETER) 158.75mm
0.50”
(DIAMETER)
MAGNETIC TRANSFORMER REQUIRED FOR ALL LOW VOLTAGE LED COMPONENT